Sign In   Register

CLUTCH

1 month 1 week ago #26957 by Jimish
CLUTCH was created by Jimish
** please Help***

does anybody know where I can get a clutch kit for my 2015 MG6 1.9 tdci 
many thanks 

Please Log in or Create an account to join the conversation.

1 month 1 week ago #26958 by brione
The following user(s) said Thank You: Jimish

Please Log in or Create an account to join the conversation.

1 month 1 week ago #26963 by Keir462672
Replied by Keir462672 on topic CLUTCH
main dealer only i beleive. And not cheapp !
The following user(s) said Thank You: Jimish

Please Log in or Create an account to join the conversation.

1 month 1 week ago #26967 by PeteC
Replied by PeteC on topic CLUTCH
See this thread:  www.mgmotor.org.uk/forum/technicals/3433...-any-recommendations
The contacts here might be able to help with a diesel clutch.
Does the diesel have a dual mass flywheel? If so that is likely to be part of the kit. Unfortunately the MG6 Diesel is a different basic engine to the petrol so you can't use the Ford trick of fitting a petrol flywheel and clutch to a diesel. Save about £500 on Mondeo or Transit!
The following user(s) said Thank You: Jimish

Please Log in or Create an account to join the conversation.

1 month 1 week ago #26970 by Loudlion
Replied by Loudlion on topic CLUTCH
Have used this MG dealer before. A bit cheaper for the parts:

https://www.ebay.co.uk/sch/m.html?_ssn=summitgarage1945&_from=R40&_sacat=0&_nkw=mg6&rt=nc

You'll want to do the flywheel too as the it will double the labour costs in the short term if you don't do it at the same time (mine had actually failed).

All in it cost me ~£1350 for mine last year. Not cheap sadly :-(
The following user(s) said Thank You: Jimish

Please Log in or Create an account to join the conversation.

1 month 1 week ago #26971 by PeteC
Replied by PeteC on topic CLUTCH
Summit are great for MG Motor parts and can get them to you by next day at a really good price. The guy in the stores will also tell if the parts are the same as the Rover 75/MGZT which can save you a lot of money!
The following user(s) said Thank You: Jimish

Please Log in or Create an account to join the conversation.

Time to create page: 0.126 seconds
© 2020 The-T-Bar.com All Rights Reserved.

Please publish modules in offcanvas position.